Product description
This carbon steel hole saw with mandrel is especially suitable for use on wood and drywall (e.g. plasterboard and OSB) and comes in a range of diameters (Ø 25–68 mm). The cutting depth is 30 mm, so you can also use it to drill through double-boarded plasterboard walls. The hexagon shank makes it quick to secure in the chuck of your power drill or cordless screwdriver. You can also use the carbon steel hole saw in power tools with a ¼" receptacle or bit holder. A centring drill bit (Ø 6 mm) with a length of 70 mm helps you to position your drilled hole exactly. The triple tooth groups are particularly good when used with less powerful cordless power tools, since they only have a very low drilling resistance. At the same time, the tooth geometry ensures fine and clean cuts. During drilling, the special tooth position reduces the size of the drilling core so that it can then be easily pried out via the openings in the side and removed from the hole saw. The hole saw is TÜV-tested, meaning you can be sure of a safe, quality product.
Suitable for material
- Very suitable Gypsum plasterboard, Softwood, OSB panel, Plywood, Chipboard, Wood-wool building board, Laminate board, Construction timber, Timber, Plastic-coated chipboard, Panels, Profiled board
- Conditionally suitable MDF board, HDF board, Laminate
Properties
- hole saw made from carbon steel for use on softwood and drywall (e.g. plasterboard, OSB)
- available in various diameters (Ø 25–68 mm) for drilling exact holes for preparing a wide range of plumbing and electrical installations
- 30 mm cutting depth, suitable for double-boarded plasterboard walls
- special tooth geometry for fine and clean cuts
- includes mandrel with centring drill bit (Ø 6 mm), ¼" hexagon shank, pre-assembled, can be used directly in all standard power drills, cordless screwdrivers and power tools with ¼" receptacle or bit holders
- triple tooth groups for low drilling resistance, ideal for cordless power tools with low driving force
- special tooth position reduces the size of the drilling core for easy removal from the hole saw
- openings in the side for prying out the drilling core
- quality tested by technical inspection authority (TÜV) for safety
Technical data
- Cutting depth 30 mm
- Drill length 50 mm
- Drill diameter 6 mm
- Shaft length 29 mm
- Shank version Hexagon shank A/F 6.35 mm (¼")
- Material Chrome-vanadium steel
- Coating Varnished
- Direction of rotation Clockwise rotation
- Additional product specification Straight-set groups of teeth
- Speed of rotation 1,200 RPM
Packaging
- Packaging in practical storage box